Yamaha NX-N500 Owner's Manual

Page of 56
Indications during playback
Indications concerning the system
Indications when the error occurred
Table of status indicator conditions
Color
Condition
Status
See page
Green
Lit
The network input is selected.
p.18, 20, 21
Flashing
A network connection is being set up.
p.12
Slow flashing
No connection is established with the network.
p.12
Fading every 3 
seconds
Audio is being received from the MusicCast CONTROLLER.
p.18, 20, 21
Pink
Lit
The unit is connected to an iOS device (AirPlay).
p.23
Slow flashing
The iOS device settings are being shared and a connection 
has been established wirelessly (Wireless Accessory 
Configuration).
p.15
Blue
Lit
The 
Bluetooth input is selected.
p.24
Slow flashing
Bluetooth cannot be paired.
Sky blue
Lit
The USB input is selected.
p.26
Slow flashing
No PC is connected to the USB jack.
Purple
Lit
The optical digital input is selected.
p.27
Slow flashing
No device is connected to the OPTICAL jack.
White
Lit
The AUX input is selected.
p.27
All colors 
listed above
Flashing
(example)
The volume setting is changed.
Fading every 2 
seconds
(example)
Speaker output is muted.
Color
Condition
Status
See page
Orange
Lit
The unit is in standby mode.
Yellow
Lit
The unit is in network standby mode.
p.11
White
Flashing
A new firmware update is available.
p.28
Slow flashing
The firmware is being updated.
Fading every 3 
seconds
The firmware has been successfully updated.
Color
Condition
Status
See page
Orange
Slow flashing
Check the connections of the right speaker.
p.9
Red
Flashes twice
No presets have been registered.
p.22
Slow flashing
The AC power supply cable is not firmly connected to the 
AC wall outlet. Connect the AC power supply cable firmly to 
the AC wall outlet.
p.10
The protection circuitry has been activated. Turn off the 
unit, disconnect the AC power supply cable, and contact 
the nearest authorized Yamaha dealer or service center.
p.33
Repeatedly 
flashes twice
The firmware download cannot be found. Check that this 
unit is connected to the network.
p.28
Repeated 
flashes three 
times
An error occurred during firmware updating. To restart 
updating, press WIRELESS DIRECT on the rear panel.
English
1 second
1 second
3 second
3 second
1 second
1 second
1 second
1 second
1 second
1 second
1 second
1 second
2 second
2 second
1 second
1 second
3 second
3 second
1 second
1 second
1 second
1 second
1 second
1 second