Sony HT-CT800 Owner's Manual
71
US
T
rouble
s
hoot
ing
“BT TX” appears in the front panel
display.
display.
Press BLUETOOTH RX/TX on the
remote control to switch [Bluetooth
Mode] to [Receiver]. “BT TX” appears
if [Bluetooth Mode] is set to
[Transmitter] (page 57). When you
press BLUETOOTH RX/TX on the
remote control, [Bluetooth Mode] is
switched to [Receiver] and the
selected input appears in the front
panel display.
Mode] to [Receiver]. “BT TX” appears
if [Bluetooth Mode] is set to
[Transmitter] (page 57). When you
press BLUETOOTH RX/TX on the
remote control, [Bluetooth Mode] is
switched to [Receiver] and the
selected input appears in the front
panel display.
Sensors of the TV do not work
properly.
properly.
The main unit may block some
sensors (such as the brightness
sensor), the remote control receiver
of your TV or the emitter for 3D
glasses (infrared transmission) of a 3D
TV that supports the infrared 3D glass
system, or wireless communication.
Move the main unit away from the TV
within a range that allow those parts
to operate properly. For the locations
of the sensors and remote control
receiver, refer to the operating
instructions supplied with the TV.
sensor), the remote control receiver
of your TV or the emitter for 3D
glasses (infrared transmission) of a 3D
TV that supports the infrared 3D glass
system, or wireless communication.
Move the main unit away from the TV
within a range that allow those parts
to operate properly. For the locations
of the sensors and remote control
receiver, refer to the operating
instructions supplied with the TV.
Wireless functions (wireless LAN,
BLUETOOTH, or subwoofer) are
unstable.
BLUETOOTH, or subwoofer) are
unstable.
Do not place metal objects other than
a TV around the system.
Music that you are not familiar with
is played suddenly.
is played suddenly.
The pre-installed sample music may
have been played. Press INPUT on the
main unit to stop playback.
main unit to stop playback.
The system does not work properly.
The system may be in demo mode. To
cancel demo mode, reset the system.
Press and hold
Press and hold
(power) and VOL –
on the main unit for more than 5
seconds (page 71).
seconds (page 71).
Resetting the System
If the system still does not operate
properly, reset the system as follows.
properly, reset the system as follows.
1
Press HOME.
The home menu appears on the TV
screen.
The home menu appears on the TV
screen.
2
Select
[Setup] from the home
menu.
The setup display appears on the TV
screen.
The setup display appears on the TV
screen.
3
Select [Resetting] - [Reset to
Factory Default Settings].
Factory Default Settings].
4
Select the menu item you want to
reset.
reset.
5
Select [Start].
To cancel resetting
Select [Cancel] in step 5.
Press and hold
(power) and VOL –
on the main unit for more than 5
seconds.
seconds.
The settings return to their initial
status.
status.
By resetting, the link with the subwoofer
may be lost. In this case, perform
“Performing the Wireless Connection of
the Subwoofer (LINK)” (page 48).
may be lost. In this case, perform
“Performing the Wireless Connection of
the Subwoofer (LINK)” (page 48).
If You Cannot Perform
Resetting Using the Home
Menu
Resetting Using the Home
Menu
Note