Yamaha R-N303 Owner's Manual

New firmware that provides additional features or product improvements will be released as needed. If the unit is 
connected to the Internet, you can download the firmware via the network and update it.

Updates can also be performed from the ADVANCED SETUP menu (p. 44).

S / T) to select 

S / T) to select 

“Information” and press ENTER.
If new firmware is available, “NEW FW Available” 
appears on the front display.

S / T) to select 

To start the firmware update, press ENTER.
The unit restarts and the firmware update starts.

To cancel the operation without updating the firmware, press 
SETUP.

If “UPDATE SUCCESS” appears on the front 
display, press A (power) on the front panel.

The firmware update is complete.

■

When new firmware is available, “NEW FW Update” will 
be displayed for a short period of time when the unit is 
turned on.

To update the unit's firmware, press ENTER (as described 
in Step 6 above) while this notification is displayed. If 

“UPDATE SUCCESS” appears on the front display, press 
A

 (power) on the front panel.

• Do not operate the unit or disconnect the power cord or network cable during firmware update. Firmware update takes about 5 

minutes or more (depending on your Internet connection speed).

• If the unit is connected to the wireless network via a wireless network adapter, network update may not be possible depending on 

the condition of the wireless connection.

S

S / T

  Available

NEW FW

  PerformUpdate

UPDATE

 Update [ENTER]

NEW FW