Yamaha R-N303 Owner's Manual

Configure the system settings of the unit while viewing the front display. The ADVANCED SETUP menu can be 
operated from the front panel.

Press A (power) to turn off the unit.

While holding down RETURN on the front 
panel, press A (power).

Press A (power) to set the unit to turn off and 
turn it on again.
The new settings take effect.

* Only for Asia and General models

Check the version of firmware currently installed on the 
unit.

• You can also check the firmware version in “Update (Network 

Update)” (p. 41) in the “SETUP” menu.

• It may take a while until the firmware version is displayed.

This changes the remote control ID on the unit.
Normally, this should be set to “ID1”. When operating the 
unit using remote controllers included with certain 
Yamaha players, set this to “AUTO”.

Settings
ID1 (default), AUTO

Selects the step size for locating tuner frequencies.
(Only for Asia and General models)

Settings
FM100/AM10, FM50/AM9 (default)

Restores the default settings for the unit.

Checks the version of firmware 
currently installed on the unit.

Selects the unit’s remote control ID.

Sets tuner frequency step.

Restores the default settings.

Updates the firmware.

A

Does not perform an initialization.

Initializes all of the network and Bluetooth 
settings. If you initialize the unit, all presets for 
the network input sources (p. 36) will be cleared.

Restores the default settings for the unit.