Yamaha YSP-5600 Digital Sound Projector Owner's Manual

APPENDIX

➤ Troubleshooting

En

Cables used to connect the subwoofer to the unit (or the wireless subwoofer 
kit) are not connected firmly.

Connect the cables firmly.

Wireless communication conditions are not good, and the unit and the 
wireless subwoofer kit are not connected.
(The indicator on the wireless subwoofer kit flashes green, or glows or 
flashes red.) 

Move the wireless subwoofer kit closer to the unit.
If the problem persists, move the wireless subwoofer kit to a location where 
its indicator steadily glows green.

–

If there are obstacles such as metal furniture obstructing communication 
between the unit and the wireless subwoofer kit, rearrange the furniture and 
the wireless subwoofer kit.

–

If there are devices such as microwave ovens or wireless network devices 
that emit electromagnetic waves, move the unit and the wireless subwoofer 
kit away from these devices.

–

The HDMI cable is not securely connected.

Connect the HDMI cable properly.

22, 23

The input switch of TV is not set correctly.

Set the TV’s input source to this unit.

The unit may be placed close to digital equipment or high-frequency 
equipment.

Move the equipment away from the unit.

–

“HDMI Control” is set to “Off”.

Set “HDMI Control” to “On”.

The HDMI control function is disabled on your TV.

Refer to documentation supplied with your TV and check the setting.

–

The number of the connected HDMI devices exceeds the limit.

Disconnect some of the HDMI devices.

–

Amplifiers (AV amplifiers, sound bars, etc.) other than the unit are 
connected to the TV or a playback device with an HDMI cable.

Connect only this unit to the TV or a playback device for use as an amplifier.

–

“Front” of “Channel Out” is set to “Stereo”.

Set to “Beam”.

The TV does not support the audio delay auto adjustment feature.

Adjust timing of sound output manually from “Audio Delay” in the option 
menu.

The key is unable to function in the current status of the unit.

–