Yamaha R-N803 Owner's Manual
18
En
Connecting to network
Set the wireless network connection
manually
manually
Before performing the following procedure, check the
security method and security key on the wireless router
(access point).
security method and security key on the wireless router
(access point).
1
Press SETUP.
2
Use the cursor keys (B / C) to select
“Network ” and press ENTER.
“Network ” and press ENTER.
Note
To return to the previous state, press RETURN.
3
Use the cursor keys (B / C) to select
“Connection” and press ENTER.
“Connection” and press ENTER.
4
Use the cursor keys (B / C) to select
“Wireless” and press ENTER.
“Wireless” and press ENTER.
5
Use the cursor keys (B / C) to select “Manual
Setting” and press ENTER.
Setting” and press ENTER.
6
Use the cursor keys (B / C) to select “SSID”
and press ENTER.
and press ENTER.
7
Use the cursor keys to enter the SSID on the
wireless router (access point), and press
RETURN to previous state.
Use the cursor keys (D/E) to move the edit position
and the cursor keys (B/C) to select a character.
Press PRESET i to insert a character and PRESET j
to delete.
wireless router (access point), and press
RETURN to previous state.
Use the cursor keys (D/E) to move the edit position
and the cursor keys (B/C) to select a character.
Press PRESET i to insert a character and PRESET j
to delete.
8
Use the cursor keys (B / C) to select
“Security” and press ENTER.
“Security” and press ENTER.
9
Use the cursor keys (D / E) to select desired
security method and press RETURN.
security method and press RETURN.
Settings
None, WEP, WPA2-PSK (AES), Mixed Mode
None, WEP, WPA2-PSK (AES), Mixed Mode
Note
If you select “None”, the connection may be insecure since the
communication is not encrypted.
communication is not encrypted.
10
Use the cursor keys (B / C) to select
“Security Key” and press ENTER.
“Security Key” and press ENTER.
11
Use the cursor keys to enter the security key
on the wireless router (access point), and
press RETURN to previous state.
If you select “WEP” in step 9, enter either 5 or 13
character string, or 10 or 26 hexadecimal digits.
If you select “WPA2-PSK (AES)” or “Mixed Mode”
in step 9, enter 8 to 63 character string or 64
hexadecimal digits.
Use the cursor keys (D/E) to move the edit position
and the cursor keys (B/C) to select a character.
Press PRESET i to insert a character and PRESET j
to delete.
on the wireless router (access point), and
press RETURN to previous state.
If you select “WEP” in step 9, enter either 5 or 13
character string, or 10 or 26 hexadecimal digits.
If you select “WPA2-PSK (AES)” or “Mixed Mode”
in step 9, enter 8 to 63 character string or 64
hexadecimal digits.
Use the cursor keys (D/E) to move the edit position
and the cursor keys (B/C) to select a character.
Press PRESET i to insert a character and PRESET j
to delete.
12
Use the cursor keys (B / C) to select
“Connect[ENTER]” and press ENTER to save
the setting.
If the wireless network connection cannot be made,
the SSID or security key may be incorrect. Repeat
from Step 6.
You can verify whether the unit is connected to a
wireless network (p. 20).
“Connect[ENTER]” and press ENTER to save
the setting.
If the wireless network connection cannot be made,
the SSID or security key may be incorrect. Repeat
from Step 6.
You can verify whether the unit is connected to a
wireless network (p. 20).
13
To exit from the menu, press SETUP.
PRESET
MEMORY
SETUP
HOME
MUTE
NOW PLAYING
VOLUME
RETURN
ENTER
OPTION
RETURN
PRESET
j / i
SETUP
ENTER
Cursor keys
B / C / D / E
SSID
MANUAL
SSID
WPA2-PSK(AES)
SECURITY
KEY