Yamaha R-N803 Owner's Manual

■

• You can configure the network parameters (such as IP address) in “IP Address” (p. 49) in the “Setup” menu.
• If you want to use a wired LAN connection when a wireless connection has been made, set “Connection” (p. 48) in the “Setup” menu 

to “Wired”.

■

When the unit is connected to the network with Wireless Direct, it cannot connect to any other wireless router (access point). To play 
back contents from the Internet or update the unit's firmware via the network, connect this unit to a network with a wired router or 
wireless router (access point).

You can easily setup a wireless connection by applying the 
connection settings on iOS devices (iPhone/iPad/iPod 
touch).
Before proceeding, confirm that your iOS device is 
connected to a wireless router (access point).

• If you set up a wireless connection with this method, all the 

network settings will be initialized.

• This configuration does not work if the security method of your 

wireless router (access point) is WEP. In this case, use other 
connection method.

Use the cursor keys (B / C) to select 
“Network” and press ENTER.

To return to the previous state, press RETURN.

Use the cursor keys (B / C) to select 
“Connection” and press ENTER.

Use the cursor keys (B / C) to select 
“Wireless” and press ENTER.

Use the cursor keys (B / C) to select “Share 
Setting” and press ENTER  twice.

When connected to a wired network, “LAN CABLE” and “Pls 
disconnect” appears on the front display. In this case, disconnect 
the network cable from the unit, and press ENTER.

You can connect to the network by 
simply making a wired LAN 
connection (p. 14)

Connect wirelessly with Wireless 
Direct (p. 19)

Cursor keys B / C

Share Setting

WIRELESS

Wireless(WAC)

SHARE