Yamaha R-N803 Owner's Manual
49
En
Configuring various functions (Setup menu)
English
AD
V
A
NCED
OP
ERA
TI
ON
■
IP Address
Configures the network parameters (such as IP address).
DHCP
Select whether to use a DHCP server.
Select whether to use a DHCP server.
Manual network settings
1
Set “DHCP” to “Off”.
2
Use the cursor keys (B / C) to select a
parameter type.
parameter type.
3
Use the cursor keys (D / E) to select the edit
position.
position.
(Example: IP address setting)
Use the cursor keys (D / E) to switch between
segments (Address1, Address2...) of the address.
segments (Address1, Address2...) of the address.
4
Use the Cursor keys (B / C) to change a
value.
value.
5
To exit from the menu, press SETUP.
■
DMC Control
Selects whether to allow DLNA-compatible Digital Media
Controller (DMC) to control playback.
Controller (DMC) to control playback.
Note
A Digital Media Controller (DMC) is a device that can control
other network devices through the network. When this function is
enabled, you can control playback of the unit from DMCs (such
as Windows Media Player 12) on the same network.
other network devices through the network. When this function is
enabled, you can control playback of the unit from DMCs (such
as Windows Media Player 12) on the same network.
■
Standby (Network Standby)
Selects whether the unit can be turned on from other
network devices (network standby).
network devices (network standby).
■
Network Name
Edits the network name (the unit’s name on the network)
displayed on other network devices.
displayed on other network devices.
1
Select “Network Name” and press ENTER.
2
Press ENTER twice to enter the name edit
display.
display.
3
Use the cursor keys (D / E) to move the edit
position and the cursor keys (B / C) to select
a character.
position and the cursor keys (B / C) to select
a character.
You can insert / delete a character, by pressing
PRESET i (insert) or PRESET j (delete).
PRESET i (insert) or PRESET j (delete).
4
To confirm the new name, press ENTER.
5
To exit from the menu, press SETUP.
Off
Does not use a DHCP server. Configure the
network parameters manually. For details, see
“Manual network settings”.
network parameters manually. For details, see
“Manual network settings”.
On (Default)
Uses a DHCP server to automatically obtain the
unit’s network parameters (such as IP address).
unit’s network parameters (such as IP address).
IP
Specifies an IP address.
SUBNET
Specifies a subnet mask.
GATEWAY
Specifies the IP address of the default gateway.
DNS P
Specifies the IP address of the primary DNS
server.
server.
DNS S
Specifies the IP address of the secondary DNS
server.
server.
Disable
Does not allow DMCs to control playback.
Enable
(Default)
(Default)
Allows DMCs to control playback.
Address1•••192
IP
Off
Disables the network standby function.
On
Enables the network standby function. (The unit
consumes more power than when “Off” is
selected.)
consumes more power than when “Off” is
selected.)
Auto
(Default)
(Default)
Enables the network standby function. The unit is
set to the power saving mode when the unit is
disconnected from the network.
set to the power saving mode when the unit is
disconnected from the network.
With an advanced energy saving design, this product achieves
a low power consumption of not more than two watts when in
Network Standby mode.
a low power consumption of not more than two watts when in
Network Standby mode.
Network Name
NETWORK
R-N803 XXXXXX
NET NAME
R-N803 XXXXXX
NET NAME