Yamaha R-N803 Owner's Manual
48
En
Configuring various functions (Setup menu)
Setup menu items
Network
Configures the network settings.
■
Connection
Selects the network connection method.
Note
When this unit is in the MusicCast extended mode, “Extend” is
displayed. For details on the extended mode, refer to “MusicCast
Setup Guide” on the Yamaha website.
displayed. For details on the extended mode, refer to “MusicCast
Setup Guide” on the Yamaha website.
■
Information
Displays the network information on the unit.
Menu item
Function
Page
Network
Connection
Selects the network connection method.
Information
Displays the network information on the unit.
IP Address
Configures the network parameters (such as IP address).
DMC Control
Selects whether to allow a DLNA-compatible Digital Media Controller
(DMC) to control playback.
(DMC) to control playback.
Standby
(Network Standby)
(Network Standby)
Selects whether to enable/disable the function that turns on the unit from
other network devices.
other network devices.
Network Name
Edits the network name (the unit’s name on the network) displayed on
other network devices.
other network devices.
Update (Network Update)
Updates the firmware via the network.
Bluetooth
On/Off
Enables/disables the Bluetooth functions.
Standby
(Bluetooth Standby)
(Bluetooth Standby)
Selects whether to enable/disable the function that turns on the unit from
Bluetooth devices (Bluetooth standby).
Bluetooth devices (Bluetooth standby).
YPAO
(Speaker A, Speaker B,
Speaker A+B)
(Speaker A, Speaker B,
Speaker A+B)
YPAO On/Off
Enables/disables the reflection of the YPAO measurement.
VOL
(YPAO Volume)
(YPAO Volume)
Enables/disables the YPAO volume function.
Volume
Max Volume
Sets the maximum volume to prevent excessive loudness.
Initial Volume
Sets the initial volume for when this receiver is turned on.
AutoPowerStdby
(Auto Power Standby)
(Auto Power Standby)
Sets the amount of time for the auto standby function.
ECO Mode
Enables/disables the eco mode (power saving mode).
Wired
Select this option when you want to connect
the unit to a network with a commercially-
available network cable (p. 14).
the unit to a network with a commercially-
available network cable (p. 14).
Wireless
Select this option when you want to connect
the unit to a network via the wireless router or
access point (p. 16).
the unit to a network via the wireless router or
access point (p. 16).
WirelessDirect
Select this option when you want to connect a
mobile device to the unit directly. For details
on settings, see “Connecting a mobile device
to the unit directly (Wireless Direct)” (p. 19).
mobile device to the unit directly. For details
on settings, see “Connecting a mobile device
to the unit directly (Wireless Direct)” (p. 19).
NEW FW
Available
Available
Appears if an update for this unit’s firmware is
available (p. 54).
available (p. 54).
STATUS
The connection status of the network.
MC NET
Status of the MusicCast Network. If “Ready”
appears, you can use the MusicCast
CONTROLLER app.
appears, you can use the MusicCast
CONTROLLER app.
MAC
Displays MAC address of the unit. MAC
address will vary depending on the connection
method (wired LAN connection or wireless
LAN / Wireless Direct connection).
address will vary depending on the connection
method (wired LAN connection or wireless
LAN / Wireless Direct connection).
SSID
(When using wireless LAN connection or
Wireless Direct) The SSID of this unit on the
wireless network.
Wireless Direct) The SSID of this unit on the
wireless network.
IP
IP address
SUBNET
Subnet mask
GATEWAY
The IP address of the default gateway
DNS P
The IP address of the primary DNS server
DNS S
The IP address of the secondary DNS server