Marantz PM6006 Owner's Manual
D/A converter
o Specifications of supported audio formats
n
Coaxial/Optical 1/2
Sampling frequency
Bit length
Linear PCM (2-channel)
32/44.1/48/88.2/96/
176.4/192 kHz
16/24 bits
0 When a digital sound signal that has a sampling frequency that is not supported by
this unit is input, the input indicator (COAXIAL or OPTICAL 1/2) flashes.
Explanation of terms
Sampling frequency
Sampling involves taking a reading of a sound wave (analog signal) at
Sampling involves taking a reading of a sound wave (analog signal) at
regular intervals and expressing the height of the wave at each reading in
digitized format (producing a digital signal).
The number of readings taken in one second is called the “sampling
frequency”. The larger the value, the closer the reproduced sound is to the
original.
Speaker impedance
This is an AC resistance value, indicated in Ω (ohms).
Greater power can be obtained when this value is smaller.
Source direct
Playback with higher fidelity to the source becomes possible, as input
Speaker impedance
This is an AC resistance value, indicated in Ω (ohms).
Greater power can be obtained when this value is smaller.
Source direct
Playback with higher fidelity to the source becomes possible, as input
audio signals are output by bypassing the audio quality-control circuits
(BASS/TREBLE/BALANCE).
Protection circuit
This is a function to prevent damage to devices within the power supply
Protection circuit
This is a function to prevent damage to devices within the power supply
when an abnormality such as an overload, excess voltage occurs or over
temperature for any reason.
If a malfunction occurs in this unit, the power indicator blinks red and the
If a malfunction occurs in this unit, the power indicator blinks red and the
unit switches to standby mode.
43