Sony HT-CT290 Owner's Manual

17

US

4

Make sure that the BLUETOOTH 
indicator on the Bar Speaker lights 
up in blue.
Connection has been established.

• Passkey  may  be  called “Passcode”, “PIN 

code”, “PIN number” or “Password”.

• You can pair up to 10 BLUETOOTH 

devices. If the 11th BLUETOOTH device is 
paired, the least recently connected 
device will be replaced by the new one.

1

2

Press INPUT repeatedly to select 
“BT”.
The system automatically 
reconnects to the BLUETOOTH 
device it was most recently 
connected to.
When the BLUETOOTH connection 
is established, the BLUETOOTH 
indicator on the Bar Speaker lights 
up in blue.

3

4

Adjust the volume.
• Adjust the volume of the 

BLUETOOTH device.

• Press 

 +/– to adjust the Bar 

Speaker volume.

• Press SW 

 +/– to adjust the 

subwoofer volume.

• Once the system and the BLUETOOTH 

device are connected, you can control 
playback by pressing 

 and /.

• You can connect to the system from a 

paired BLUETOOTH device even when the 
system in standby mode, if you set the 
BLUETOOTH standby mode to on 
(page 17).

• The audio playback on this system may 

be delayed from that on the BLUETOOTH 
device because of the characteristics of 
the BLUETOOTH wireless technology.

Perform any of the following items.

• Press

(pairing) on the Bar Speaker 

again.

• Disable the BLUETOOTH function on 

the BLUETOOTH device.

• Turn off the system or the BLUETOOTH 

device.

Setting the BLUETOOTH 
standby mode

When the system has pairing 
information, you can turn on the system 
and listen to music from a BLUETOOTH 
device even when the system is in 
standby mode by setting the 
BLUETOOTH standby mode to on.

During BLUETOOTH standby mode, 
standby power consumption increases.

On
The USB and TV indicators flash twice.

Off
The USB indicator flashes twice.