Kodak DX4330 User Guide
26
Chapter 2
Setting Exposure Compensation
Use Exposure Compensation to control how much light enters the camera. This
setting is useful for taking pictures in very large rooms, under low light,
without a flash.
Adjust the exposure by plus or minus 2 steps in 1/2-step increments.
setting is useful for taking pictures in very large rooms, under low light,
without a flash.
Adjust the exposure by plus or minus 2 steps in 1/2-step increments.
NOTE: Exposure Compensation cannot be used with Long Time Exposure.
1
In any Still mode, press the Menu button.
2
Highlight Exposure Compensation
, then press the OK button.
3
Press
to select the Exposure
Compensation setting.
m
If pictures are too light, decrease the
value.
value.
m
If pictures are too dark, increase the
value.
value.
4
Press the OK button to accept the change.
5
Press the Menu button to exit the menu.
6
Use the LCD to frame your subject. Press the
Shutter button half-way to set the focus,
then continue pressing completely down
to take the picture.
Shutter button half-way to set the focus,
then continue pressing completely down
to take the picture.
This setting remains until you move the
Mode dial or turn off the camera.
Mode dial or turn off the camera.