Thunder Tiger Corp. COUGARGP3 User Manual

A binding feature is included in the ACE RC Cougar 2.4GHz spread spectrum system to ensure the transmitter 
and receiver bind properly and prevent interference from other controllers. 
To manually bind Tx/Rx, please proceed as per the following steps:
a. Press and hold the “Binding SW” button on the top of the transmitter while turning on the transmitter.
b. Release the “Binding SW” button after the green / red LED flashes indicating the transmitter is binding.
c. Press and hold the bind button on the receiver while turning on the receiver. Binding process will then start 

automatically.The LED will turn green/red flash on the receiver.

d. Release the “Binding SW” button. Successful binding is confirmed by the binding LED changing from a Green / 

Red flashing and then remain solid on the transmitter. The LED will turn green on the receiver. Once binding is 
complete, the system will automatically connect.

Note: Binding process may take 2~4 seconds to execute. If binding fails, the LED on the receiver will 

             turn red. Please turn off the power and repeat the steps from a) ~d).