Thunder Tiger Corp. TT-FHM2P4G-A16 User Manual
6
9.Training Course
Use a suitable “buddy” cable to plug into the
transmitter mini USB port and connect 2
transmitters (instructor and trainer) for flying
lessons. The instructor can give full control to the
trainer by holding down the “Trainer” button located
on the top-left side of the transmitter. When
released, full control is instantly returned to the
Instructor.
transmitter mini USB port and connect 2
transmitters (instructor and trainer) for flying
lessons. The instructor can give full control to the
trainer by holding down the “Trainer” button located
on the top-left side of the transmitter. When
released, full control is instantly returned to the
Instructor.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one of the
following measures:
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one of the
following measures:
FCC Caution:
To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user's
authority to operate this equipment. (Example - use only shielded interface
cables when connecting to computer or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation.
To assure continued compliance, any changes or modifications not expressly
approved by the party responsible for compliance could void the user's
authority to operate this equipment. (Example - use only shielded interface
cables when connecting to computer or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause
undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your
body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
The antennas used for this transmitter must be installed to provide a separation
distance of at least 20 cm
from all persons and must not be co-located or operating in conjunction with
any other antenna or transmitter.
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.This equipment should be installed and operated
with a minimum distance of 20 centimeters between the radiator and your
body.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
The antennas used for this transmitter must be installed to provide a separation
distance of at least 20 cm
from all persons and must not be co-located or operating in conjunction with
any other antenna or transmitter.
■
■
■
■
■
■
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Interference Statement
Using Caution at the Flying Field
Always perform a pre-flight range-check to ensure conditions are
interference-free.
Do not operate the model or use the radio in rain, lightning, or at night.
Do not operate the model or use the radio if you have been drinking
alcohol or under the influence of any other substance that could affect
your skills and judgment.
Always check battery charge before flight.
Keep out of reach of children.
Do not store the radio in temperatures below -10 ˚C (14˚F) or above
40˚C (104˚F) or in a humid, dusty, or high vibration environment.
Keep the radio away from direct sunlight.
To prevent corrosion, remove batteries before storing the radio for a
long period.
interference-free.
Do not operate the model or use the radio in rain, lightning, or at night.
Do not operate the model or use the radio if you have been drinking
alcohol or under the influence of any other substance that could affect
your skills and judgment.
Always check battery charge before flight.
Keep out of reach of children.
Do not store the radio in temperatures below -10 ˚C (14˚F) or above
40˚C (104˚F) or in a humid, dusty, or high vibration environment.
Keep the radio away from direct sunlight.
To prevent corrosion, remove batteries before storing the radio for a
long period.
■
■
■
■
■
■
■
■
■
■
■
■