Rommelsbacher CT 2215/IN User Manual

21

•  Connect the mains plug with the power 
  socket. 

•  The “temp” display (7b) shows “-L-“ or 
  “-H-“, depending on the residual heat of 
  the cooking zone. Also an acoustic signal 
  is audible.
  The control is in standby mode.

•  Position suitable cookware on the middle 
  of the cooking zone. 

•  For switching-on touch the main switch 
  (1). The LED “ON/OFF“ (8) is fl ashing.

•  Now decide on the cooking mode you 
  would like to work with. 

NOTE: If there is no further activation within 60 seconds after switch-on, the control will switch 
back to the standby mode. 

The “power level” mode is ideal for boiling water and for steaming.

•  For cooking in the “power level” mode touch 
  the “+“ sensor (2). 
  The appliance automatically switches to the 
  power level “05“. The display (7c) shows 
  “05“.

 

NOTE: If started with sensor ”-“ (2), the 

  appliance switches to power level “09“ 
  in the beginning.

•  By touching the “+“ sensor (2) you can 
  increase the power up to level “09”. 

Although any other sensor is still activated, the appliance may be brought to the standby mode 
at any time during operation by touching the associated main switch sensor. 

At the left and right side below the casing there are practical recessed grips with ribbing, which 
ensure an easy and convenient transport of the appliance.