Wireless Seismic Inc. 00401 User Manual

Draft

100

RT 1000 v1.3 Deployment Guide

R03.d

Assembly Instructions

This section provides instructions and illustrations for assembly of the tripod.

1 Assemble one 244 Flange to the Center Support Plate using four 1/4-20 x 3/4" 

carriage Bolts, Lock washers and Hex Nuts. Make sure to assemble the Bolts 
with the Heads on the underside of the frame. Hex Nut should be on the top 
side of the frame. 

2  Assemble Base Frame and Center Support Plate using twelve 1/4-20 x 5/8" 

carriage Bolts, Lock washers and Hex Nuts. Make sure to assemble the Bolts 
with the Heads on the underside of the frame. Hex Nut should be on the top 
side of the frame.

3 Assemble the four (4) Braces to the upper support flange using four 1/4-20x3/

4 Hex Head Bolts, Lock washers and Nuts.

4 Assemble the other end of the braces to the base frame using the four (4) 1/4-

20 x 1/2" Hex Head Bolts, Lock washers, and Nuts.

5 Insert Bolts into upper and lower flange.
6 Slide the mast (not included) into position and tighten securely and weigh.

Wade Antenna Ltd.

Ontario, Canada