DAMALL TECHNOLOGIES SAS D-2304 User Manual
D
AMALL
IP
P
HONES
U
SER
M
ANUAL
P
AGE
|
18
5.4.3 Call Waiting
Enable call waiting.
5.4.4 Autodial
This option sets an outgoing number that the phone will automatically dial each
time the receiver is lifted. No other numbers can be called from the phone.
time the receiver is lifted. No other numbers can be called from the phone.
5.4.5 Dialling Rules
This configures the three SIP handlers which indicate the end of an SIP dialling
session. With most IP phone systems, no outgoing calls can be made unless at least
one of these is selected:
session. With most IP phone systems, no outgoing calls can be made unless at least
one of these is selected:
5.4.6 Greeting Word
This controls the text displayed on the LCD panel when the phone is on. Use the
alphabetical values on the number pad to enter text.
alphabetical values on the number pad to enter text.
5.5 Network Setup
Network setup is for configuring the phone’s SIP and network settings. To enter the
Network setup a password is required. The default password is: 123
To check for existing network settings use the N
Network setup a password is required. The default password is: 123
To check for existing network settings use the N
AVIGATE
buttons. Pressing (D
OWN
)
displays the network mode (either DHCP or static), the IP address of the phone, and
Busy
Forward calls only if the line is busy
No Answer
Forward calls if there is no answer on the line
End with ‘#’
Calls are placed after the # key is pressed. This is the
default setting for the device.
default setting for the device.
Fixed Length
Calls must be a set number of digits long. Calls are
placed once a set number of digits have been entered.
placed once a set number of digits have been entered.
Timeout
Calls are placed after a set delay has elapsed. This is a
measurement, in seconds, for how long the phone
waits after a number has been entered before placing a
call.
measurement, in seconds, for how long the phone
waits after a number has been entered before placing a
call.