DAMALL TECHNOLOGIES SAS D-2304 User Manual
D
AMALL
D-2304
P
AGE
|
19
the network gateway. Pressing (R
IGHT
) displays the status and IP address of the
SIP server.
5.5.1 SIP Setup (1 and 2)
Configure the options to enable each SIP account:
5.5.2 Network
To configure the phone’s network adapter use these settings.
When using the keypad to enter the Static address, the * key is used as a dot
separator. For example, entering: 192*168*0*12 sets the IP address to
192.168.0.12. All four items need to be configured for the phone to function.
5.5.3 Change Password
Use this to change the password for the Network Setup options.
5.6 Reboot
This reboots the device.
Enable Identity
Enables the SIP account
Server Address
IP address of the SIP server
Server Port
Port number on the SIP server
Display Name
The extension number of the phone
Account Name
The user ID created for the SIP line
SIP Password
Password as created on the server
Network Mode
Set to either DHCP or Static. DHCP means that a server
will assign network properties to the phone. In Static
network mode, additional settings are needed.
will assign network properties to the phone. In Static
network mode, additional settings are needed.
Static Setup
Set up the Static IP of the phone the same way that any
static IP connection would be set up. Assign an IP
address, a Subnet Mask, a network gateway, and a DNS
address.
static IP connection would be set up. Assign an IP
address, a Subnet Mask, a network gateway, and a DNS
address.