Landis+Gyr Technology Inc. ER6R1S4 User Manual
Draft
Chapter 1 - Gridstream Enhanced Cellular Overview
Landis+Gyr
10
98-1723 Rev AB
User Guide
The Meter Display will indicate "GSS" and all dashes if cellular communication has not been estab-
lished. Once cellular communication has been established, the last two indicators on the right side of
the display, we’ll refer to as A & B, will illustrate the following:
lished. Once cellular communication has been established, the last two indicators on the right side of
the display, we’ll refer to as A & B, will illustrate the following:
LAN ID
The LAN ID is a unique identifier for each Gridstream Enhanced Cellular endpoint. It is always dis-
played in hex. Landis+Gyr provides the LAN address. You cannot change the LAN ID of a radio.
The LAN ID (Endpoint Serial Number) will be matched to the Meter ID through a Meter Manufac-
turer File (MMF). The MMF will be provided to you by Landis+Gyr with your meter purchase.
played in hex. Landis+Gyr provides the LAN address. You cannot change the LAN ID of a radio.
The LAN ID (Endpoint Serial Number) will be matched to the Meter ID through a Meter Manufac-
turer File (MMF). The MMF will be provided to you by Landis+Gyr with your meter purchase.
Labels
The endpoint includes the following labels:
Figure 1 - 5. Label Identification
A. Landis+Gyr Product ID (printed)
B. Landis+Gyr LAN ID, includes programmed module part number (printed and barcoded)
Table 1-1. Communication Hardware Status
Status Slot
A
A
Description
0
No communication failures to report
1
Cellular connection not established
2
Communication with ZigBee module failed
3
Cellular connection not established + communication with ZigBee module failed
4
Communication to NTP server not established
5
Cellular connection not established + Communication to NTP server not established
6
Communication to NTP server not established + Communication with ZigBee module failed
7
Combination of codes 4 + 2 + 1
Table 1-2. Head End Communication Status
Status
Slot B
Slot B
Description
0
Registered with Command Center
1
Has not registered with Command Center