Landis+Gyr Technology Inc. ER6R1S4 User Manual
Draft
Landis+Gyr
Chapter 1 - Gridstream Enhanced Cellular Overview
User Guide
98-1723 Rev AB
11
ZigBee Support
The Gridstream Enhanced Cellular communication module supports an integrated ZigBee system on
the chip. This enables the endpoint to communicate via Smart Energy Profile with other ZigBee
enabled devices.
the chip. This enables the endpoint to communicate via Smart Energy Profile with other ZigBee
enabled devices.
Retrieving Data
The endpoint is capable of delivering data via an On Request Read (ORR) or autonomously (period-
ically reported).
ically reported).
Availability of the following features depends on meter configuration. On Request Reads (ORR)
available with this endpoint are:
available with this endpoint are:
•
Register Data (Standard Table 23) which includes consumption, demand and TOU values
•
Load Profile or Interval Data. Multiple Load Profile channels will be available for meters
that support it (Standard Table 64 FOCUS AXe)
that support it (Standard Table 64 FOCUS AXe)
•
Revenue Integrity Services which includes instantaneous measurements related to line
voltage, current and phase angle
voltage, current and phase angle
Availability of the following features depends on meter configuration. Options for periodic reported
data with this module include:
data with this module include:
•
Register Data & Status Flags (Standard Tables 23 & 3) which includes consumption,
demand, TOU values and meter status
demand, TOU values and meter status
•
Load Profile or Interval Data & Status Flags (Standard Tables 64 & 3) which includes
interval data and meter status
interval data and meter status
Demand Reset
When the Command Center Host delivers a Demand Reset command, the communication module
passes the command to the meter, which performs the Demand Reset on the meter. The endpoint
then passes the previous demand data captured by the meter (Standard Table 25) to the Host for pro-
cessing. Scheduling the demand resets may be performed through the Command Center Host. See
the chapter on Demand Resets in this manual for further instructions.
passes the command to the meter, which performs the Demand Reset on the meter. The endpoint
then passes the previous demand data captured by the meter (Standard Table 25) to the Host for pro-
cessing. Scheduling the demand resets may be performed through the Command Center Host. See
the chapter on Demand Resets in this manual for further instructions.
Power Outage/Restoration
When an outage greater than 30 seconds occurs, the meter uses an early power failure signal to alert
the communication module to disconnect from the meter's power immediately. The communication
module saves critical module data to non-volatile memory and creates and sends a power outage
message. This message includes the following information:
the communication module to disconnect from the meter's power immediately. The communication
module saves critical module data to non-volatile memory and creates and sends a power outage
message. This message includes the following information:
•
LAN ID
•
Outage timestamp
•
Outage count