PipeHawk Plc 99061003 User Manual
PipeHawk Operator’s Manual
100049000-C
Press Key 3
This confirms the above selection
7.3.4 Select the Directory on the Client PC Containing the Data to be transferred.
When the C:/ drive has been selected the available directory options are presented to the
operator. The directory employed to receive the data must now be selected. (This is contains
the data to be transferred).
operator. The directory employed to receive the data must now be selected. (This is contains
the data to be transferred).
Press Key 1
OR
Press Key 2
To select the chosen directory for data storage.
The text window will read: -
Current PC Directory C:/Data Directory
Press Key 3
This confirms the above selection.
7.3.5 Data
Selection
Press Key 1
OR
Press Key 2
This scrolls the user up and down through the sequential
list of data sets collected and stored on the machine.
Move the “>” symbol to indicate a chosen data set.
list of data sets collected and stored on the machine.
Move the “>” symbol to indicate a chosen data set.
Press Key 3
Highlights the chosen data set with an asterisk “*”.
Pressing again deselects the data set.
Pressing again deselects the data set.
7.3.6 Data
Transfer
Press Key 5
This copies data from the chosen directory on the Client
PC to the PipeHawk hard disc.
PC to the PipeHawk hard disc.
© PipeHawk plc 2003
Page 36