Shanghai DareGlobal Technologies Co. Ltd. A4001N User Manual

Appendix B - Networking Basics 
 

 

4Port 2x2 wireless ADSL modem User Manual   

91 

 
If your DHCP is disabled, or you need to assign a static IP address, please follow the steps below: 
 
Step 1 
Windows® XP - Click on Start > Control Panel > Network Connections. 
Windows® 2000 - From the desktop, right-click on the My Network Places > Properties. 
 
Step 2 
Right-click on the Local Area Connection which represents your D-Link network adapter and select Properties. 
 
Step 3 
Highlight Internet Protocol (TCP/IP) and click on the Properties. 
 
Step 4 
Click on the Use the following IP address and enter an IP address that is on the same subnet as your network or the LAN IP 
address on your router. 
Example: If the router’s LAN IP address is 192.168.1.1, make your IP address 192.168.1.X where X is a number between 2 and 
99. Make sure that the number you choose is not in use on the network. Set Default Gateway the same as the LAN IP address of 
your router (192.168.1.1). 
 
Set Primary DNS the same as the LAN IP address of your router (192.168.1.1). The Secondary DNS is not needed or you may 
enter a DNS server from your ISP. 
 
Step 5 
Click on the OK twice to save your settings.