Geemarc Telecom International Ltd. AC3T User Manual

 

3 

 

 

2 - Connect the RJ11 to RJ11 cable between the 

Amplicall and phone 

3 - Connect one end of the telephone line cord to the unit 

and the other end to a wall socket. 

4 - Connect the adaptor (option). 
 
For serving or replacement, you purchase a 
suitable shaker Model no. CLA2 through service centre 
or retailer shop 

 

4 

 
Electrical connection : The apparatus is designed to 
operate from a 230V 50Hz supply only. (Classified as 
«hazardous voltage» according to EN60950 standard). 
The apparatus does not incorporate an integral power   
on/off switch. To disconnect the power, either switch off 
supply at the mains power socket or unplug the AC 
adaptor. When installing the apparatus, ensure that the 
mains power socket is readily accessible. 
Telephone connection : Voltages present on the 
telecommunication network are classified TNV-3 
(Telecommunication Network Voltage) according to the 
EN60950 standard. 

When using your device equipment, basic safety precautions should 
always be followed to reduce the risk of fire, electric shock and injury 
to persons, including the following: 
1. Do not use this product near water, for example, near a bath tub, 
wash bowl, kitchen sink or laundry tub, in a wet basement or near a 
swimming pool. 
2. Avoid using a device (other than a cordless type) during an 
electrical storm. There may be a remote risk of electric shock from 
lightning. 
3. Do not use the device to report a gas leak in the vicinity of the 
leak. 
4. Use only the power cord and batteries indicated in this manual. Do 
not dispose of batteries in a fire. They may explode. Check with local 
codes for possible special 

disposal instructions.