Geemarc Telecom International Ltd. AC3T User Manual

 

5 

1.  The Door Bell can be take with the people who need 

the assistance. 

2.  The door bell can be fixed on the wall or door 

surround, drill two holes horizontally, 15mm apart, 

put the supplied anchor into the two holes, hang the 

door bell on to the two anchors and then instert and 

tighten screws, and then stick the blank sticker on the 

two holes. 

3.  The door be can be stick onto a door, window using 

the supplied strong adhesive tape. Remove the 

protective paper from the adhesive tape on the back 

of the door bell and stick to the required window.     

 

 

 

 

 

 

 

 

 

 

6 

1. Drill two holes horizontally, 96mm apart, and leave the 

screws protruding from the wall by 5mm. 

2. Hang the base on to the two screws and pull the base 

down to lock it on 

If you want to mount the unit on the table, only put it into 
the base cradle, and then place the base cradle on the 
table. 

Choose which alarm mode you want to by moving the 
alarm mode switch to one of the following position: 
 
0   : no alarm 

: both strobe flasher and sound alarm activated   
 
: both strobe flasher and shaker (if connected) 
activated 
: both sound alarm and shaker (if connected) 
activated  

Use the slider control to adjust the volume of door bell 
ring and phone ring or power OFF.