Inscape Data Co. AGNVC110W User Manual
NVC100/110 User’s Manual
17
17
17
17 of
of
of
of 51
51
51
51
3. Remove the crossover LAN cable and connect the NVC100/110 to the network using a
regular LAN cable. Check to see if you can receive video data when connecting to the
NVC100/110 using the viewer program.
regular LAN cable. Check to see if you can receive video data when connecting to the
NVC100/110 using the viewer program.
3.3. Connecting to Cable Modem
1. Apply power and connect the PC and the NVC100/110 using the crossover cable provided
with the system.
2. Set up network parameters by running the “IP-Installer”. (Refer to Figure 3-4).
Figure 3-4. Direct connection using crossover LAN
3. Remove the crossover cable and connect the NVC100/110 to the network using a regular
LAN cable as shown in Figure 3-5. Check to see if you can receive video data when connecting
to the NVC100/110 using the viewer program.
When connecting the NVC100/110 to an xDSL Modem, a regular LAN cable is usually
required. However, since some xDSL Modems have crossover connections, please contact
your xDSL provider for detailed information.