Inscape Data Co. AGNVC110W User Manual
NVC100/110 User’s Manual
15
15
15
15 of
of
of
of 51
51
51
51
3. Connecting the NVC100/110
The NVC100/110 supports LAN, xDSL, and Cable modems. It also supports shared IP networks
where single IP is shared by many devices using an IP sharing device. Refer to the
IP-Installer
User’s Guide
for details on setting the IP address for the NVC100/110 using the “IP-Installer”.
3.1. Connecting to LAN
When connecting the NVC100/110 to an LAN, it is generally connected as follows:
Figure 3-1. Connecting the NVC100/110 to LAN
1. After applying the power, connect the LAN cable and assign an IP address to the NVC100/110
by using the IP-Installer.
2. To assign an IP address to the NVC100/110, run the IP-Installer on the PC connected to the
same subnet as the NVC100/110 is connected.
3. Check to see if you can receive video data when connecting to the NVC100/110 using the
viewer program.
②
②
②
②