Inscape Data Co. AGNVC110W User Manual
NVC100/110 User’s Manual
47
47
47
47 of
of
of
of 51
51
51
51
server to forward all packets coming in through a specific port to the NVC100/110. You must
open the UDP Ports from 6970 to 7009.
open the UDP Ports from 6970 to 7009.
2. After Successfully Connecting to the NVC100/110
•
Video movement is slow.
In the Basic Setup of Admin Mode, lower the “Quality”. High quality means more data. You
can also set the “Max. Bandwidth” to a higher value. However, this value must be lower than
the maximum upload speed of your network. For example, if the maximum uploading
bandwidth of the network is 400Kbps, set the total “Max. Bandwidth” to 384Kbps. If you set it
higher, the video image can be corrupted with artifacts. Ask your network manager or ISP for
the maximum uploading bandwidth of the network.
can also set the “Max. Bandwidth” to a higher value. However, this value must be lower than
the maximum upload speed of your network. For example, if the maximum uploading
bandwidth of the network is 400Kbps, set the total “Max. Bandwidth” to 384Kbps. If you set it
higher, the video image can be corrupted with artifacts. Ask your network manager or ISP for
the maximum uploading bandwidth of the network.
•
The image is dull and I see green and pink dots.
This could be caused by performance limitations of the PC. Do not run too many programs
while running the viewer program. The other reason could be missing data while transmitting
from the NVC100/110.
while running the viewer program. The other reason could be missing data while transmitting
from the NVC100/110.
••••
Mosaic phenomenon.
Mosaic phenomenon occurs when not enough network bandwidth is available considering the
resolution and frame rate of the video.
An example is 640x240 video with low Max. Bandwidth.
Users are recommended to adjust resolution and frame rates to lower values for lower
bandwidth network.