MagTek 21165046 User Manual

 

23

 
Three bezel configurations are described in this appendix: the International and the North 
American Plastic Bezels and the International Metal Bezel.  The International Bezels are slightly 
larger than the North American Bezel and require a larger panel opening for installation. The 
International Bezels are suited to applications requiring metric screws and the North American 
Bezel to imperial screws.  From the drawings in this section, the user may design a bezel for 
different requirements. 
 
INTERNATIONAL PLASTIC BEZEL MOUNTING 
 
The International Plastic Bezel (P/N 21161202) is attached to the unit by four screws (Mounting 
inserts M3.5 x 5 Minimum Deep). The four screws are inserted into the front flange slots to 
retain the unit to the bezel.  Figure B-1 shows the position and the dimensions of the flanges. 
 
Figure B-2 shows the orientation and dimensions of the bezel and recommended dimensions for 
the panel opening.  Four screws that mount the Bezel to the panel are also M3.5.  The length of 
the screws depends on the panel thickness, washers, and spacers used in mounting the panel.