MagTek 30056033 User Manual
Maintenance
20
5
MAINTENANCE
5.1 Cleaning
Periodic cleaning of the DynaPro’s exterior may be required. To clean the outside of the
DynaPro, wipe down the unit with a soft, damp cloth and then wipe with a dry cloth.
DynaPro, wipe down the unit with a soft, damp cloth and then wipe with a dry cloth.
Avoid excessive use of liquid cleaning products and do not attempt to clean the card path with
any objects other than approved cleaning cards or compressed air.
5.2 Adjusting the LCD
If it becomes necessary to adjust the LCD brightness or contrast, press the Left function key,
followed by “523” (corresponding to the letters “LCD”), followed by the Right function key.
The LCD will display the following screen:
followed by “523” (corresponding to the letters “LCD”), followed by the Right function key.
The LCD will display the following screen:
Figure 5-1. Adjusting the DynaPro’s LCD
Once the above screen has displayed, press 1 to decrease, or 3 to increase, the brightness. Hit the
green arrow key to accept your brightness setting.