Mitel Deutschland GmbH 68635RFP36U-01 User Manual
SIP-DECT OM System Manual
260
The Mitel 600 DECT phone software can be updated via the Air interface, see section 7.20. A separate
software package can also be provided for specific updates of the DECT phone software.
software package can also be provided for specific updates of the DECT phone software.
IMPORTANT :
Log in as “root” to install and/or update OMM. If you do not login as root
to open the OMM console, the path to ommconsole is not set. You must enter the
whole path “/usr/sbin/ommconsole” to start the OMM console.
Command syntax
For extraction and automatic standard installation
sh
For extraction and automatic standard installation
sh
SIP-DECT_<version>.bin
For extraction and automatic standard installation
sh
sh
SIP-DECT_<version>.bin -f
For extraction of RFP packages only
sh
sh
SIP-DECT_<version>.bin –x
RPM packages can also be installed manually.
For a first OMM type installation
rpm –i SIP-DECT-OMM-<version>.i586.rpm
For an OMM software update (see section 7.14)
rpm –U SIP-DECT-OMM-<version>.i586.rpm
For Mitel 600 DECT phone software installation
rpm –i SIP-DECT-HANDSET-<version>.i586.rpm
To delete a software release
rpm –e SIP-DECT-HANDSET and
rpm –i SIP-DECT-OMM-<version>.i586.rpm
For an OMM software update (see section 7.14)
rpm –U SIP-DECT-OMM-<version>.i586.rpm
For Mitel 600 DECT phone software installation
rpm –i SIP-DECT-HANDSET-<version>.i586.rpm
To delete a software release
rpm –e SIP-DECT-HANDSET and
rpm –e SIP-DECT-OMM
To check an installed release
rpm –qi SIP-DECT-OMM
or
rpm –qi SIP-DECT- HANDSET
After the installation phase, start OMM by running the command
“/etc/init.d/sip-dect-omm start”
To check an installed release
rpm –qi SIP-DECT-OMM
or
rpm –qi SIP-DECT- HANDSET
After the installation phase, start OMM by running the command
“/etc/init.d/sip-dect-omm start”
7.13.3 CONFIGURING THE START PARAMETERS
The basic data for initializing OMM is stored in the file “/etc/sysconfig/SIP-DECT”. It can be edited to
modify the OMM interface.
modify the OMM interface.
##############################################
# OMM configuration file
##############################################
# if you use a different interface for omm activate/correct parameter below
#OMM_IF="eth0"
#
OMM_CONFIG_FILE=/opt/SIP-DECT/tmp/omm_conf.txt
#
#if you use OMM resiliency for OMM activate parameter below with OMMs IP adresses
#OMM_RESILIENCY="192.168.0.1:192.168.0.2"