Mitel Deutschland GmbH 68635RFP36U-01 用户手册

SIP-DECT OM System Manual

260

The Mitel 600 DECT phone software can be updated via the Air interface, see section 7.20. A separate
software package can also be provided for specific updates of the DECT phone software.

IMPORTANT :

Log in as “root” to install and/or update OMM. If you do not login as root

to open the OMM console, the path to ommconsole is not set. You must enter the

whole path “/usr/sbin/ommconsole” to start the OMM console.

Command syntax
For extraction and automatic standard installation
sh

SIP-DECT_<version>.bin

For extraction and automatic standard installation
sh

SIP-DECT_<version>.bin -f

For extraction of RFP packages only
sh

SIP-DECT_<version>.bin –x

RPM packages can also be installed manually.

For a first OMM type installation
rpm –i SIP-DECT-OMM-<version>.i586.rpm
For an OMM software update (see section 7.14)
rpm –U SIP-DECT-OMM-<version>.i586.rpm
For Mitel 600 DECT phone software installation
rpm –i SIP-DECT-HANDSET-<version>.i586.rpm
To delete a software release
rpm –e SIP-DECT-HANDSET and

rpm –e SIP-DECT-OMM
To check an installed release
rpm –qi SIP-DECT-OMM
or
rpm –qi SIP-DECT- HANDSET
After the installation phase, start OMM by running the command
“/etc/init.d/sip-dect-omm start”

7.13.3 CONFIGURING THE START PARAMETERS

The basic data for initializing OMM is stored in the file “/etc/sysconfig/SIP-DECT”. It can be edited to
modify the OMM interface.

##############################################

# OMM configuration file

##############################################

# if you use a different interface for omm activate/correct parameter below

#OMM_IF="eth0"

OMM_CONFIG_FILE=/opt/SIP-DECT/tmp/omm_conf.txt

#if you use OMM resiliency for OMM activate parameter below with OMMs IP adresses

#OMM_RESILIENCY="192.168.0.1:192.168.0.2"