Mitel Deutschland GmbH 68635RFP36U-01 User Manual
SIP-DECT OM System Manual
304
7.26.3.3 “Remove image” Task
The selected image table entries will be removed from the current project after an inquiry dialog. All
devices which were already assigned to one of the removed images will be reset to unassigned state.
The selected image table entries will be removed from the current project after an inquiry dialog. All
devices which were already assigned to one of the removed images will be reset to unassigned state.
7.26.3.4 “Generate” Task
By choosing this task the user can start the generation of the graphics data needed by the OM Locating
application. The OMP will only create graphics data for selected image table.
By choosing this task the user can start the generation of the graphics data needed by the OM Locating
application. The OMP will only create graphics data for selected image table.
In a file save dialog the user can select a storage directory for the generated graphics data. A progress
dialog informs about the actual status of the generation process. If the process is canceled by the user,
the OMP will finish generation of graphics data for the actual background image before stopping the
process.
dialog informs about the actual status of the generation process. If the process is canceled by the user,
the OMP will finish generation of graphics data for the actual background image before stopping the
process.
7.26.3.5 “Import project” Task
With the
With the
Import project task the user can load a previously exported project. Images and device
placements done before importing a project will be substituted by the data contained in the project.
The system name and the PARK are not checked during this operation. It is possible to import a project
created for another system or after the system name or PARK was changed.
created for another system or after the system name or PARK was changed.
Devices are managed by their IDs. If a device ID from imported data cannot be matched with a device ID
from the system the OMP is currently connected to, the placement data for such a device will not be
imported.
from the system the OMP is currently connected to, the placement data for such a device will not be
imported.
The image files will not be copied. The actual project will save references to the storage place of the
images.
images.
7.26.3.6 “Export project” Task
With the
With the
Export project task, the user opens a File Save dialog where the user can select a directory for
the exported data, or create a new one.
The OMP exports the project file and copies all background image files to the chosen destination.
A project exported with this task can be imported again via the
Import project task.
7.26.3.7 “Adjust overview size” Task
The OM Locating application needs two graphic maps for each device:
The OM Locating application needs two graphic maps for each device:
•
One detail map image showing the position of an RFP in same scale as the background image on
which the device was placed.
•
An overview map showing a bigger area of the background image down scaled and the position of the
RFP.
There is no special requirement to the scale of the used background images. The selection of the
overview scale may differ depending from building or area proportions.
overview scale may differ depending from building or area proportions.
With the
Adjust overview zoom task the user can adjust the down scale zoom factor for the overview
map images (2) individually for the currently selected background image.