Mitel Deutschland GmbH 68635RFP36U-01 User Manual
Configuration and Administration
305
The content of an area generated as overview map is shown by the transparent overlay square.
Changing the size of this area can be done by grabbing the light blue point at the right upper edge and
moving the edge to (or away from) the center of the area.
Changing the size of this area can be done by grabbing the light blue point at the right upper edge and
moving the edge to (or away from) the center of the area.
By grabbing the red point in the middle of the overlay square it is possible to move the overlay square
around.
around.
For generation of the overview map images the position of overlay square does not matter. Only the size
is important to calculate the scale ratio for down scaling.
is important to calculate the scale ratio for down scaling.
7.26.3.8 “Set overview size” Task
Instead of adjusting the scale factor for down scaling on generation of overview maps with the method
described in section 7.26.3.7 it is possible to set a scale factor for the selected images.
Instead of adjusting the scale factor for down scaling on generation of overview maps with the method
described in section 7.26.3.7 it is possible to set a scale factor for the selected images.
The value of the scale factor must be chosen with the slider
Overview size in the task panel prior to
assign it to one, several or all images with the
Set overview size task.
7.27 MONITORING WITH USB VIDEO DEVICES
To use an USB video device in interaction with the OM Locating application, a video user account must
to be configured. In addition the configuration and activation of a video device (“USB Web Cam”) itself is
needed.
to be configured. In addition the configuration and activation of a video device (“USB Web Cam”) itself is
needed.