Mitel Deutschland GmbH 68635RFP36U-01 User Manual
Configuration and Administration
317
The start-up delay should be adjusted according to the system start-up. The system start-up depends on
the actual physical configuration, infrastructure components and parameter settings.
the actual physical configuration, infrastructure components and parameter settings.
The statistic counter “Sync RFP start-up time” and “Sync Cluster start-up time” help to find an
appropriate value for the start-up delay.
appropriate value for the start-up delay.
As soon as the start-up delay has elapsed, the status attributes are checked and the availability status
will be determined. If the result is “Unavailable”, the status will be escalated.
will be determined. If the result is “Unavailable”, the status will be escalated.
The SIP registration process runs independently from the user monitoring start-up and infrastructure
start-up. Monitored users as well as other users, who have the VIP flag set, are registered first.
start-up. Monitored users as well as other users, who have the VIP flag set, are registered first.
7.29.9 SUPPORTED DECT PHONES
The Mitel 600 DECT phone family is fully supported.
The following states are managed independent of the DECT phone type:
•
Handset assignment status (HAS)
•
Handset subscription status (HSS)
•
Handset registration status (HRS)
•
Handset activity status (HCS)
•
SIP user registration status (SRS)
•
Call diversion status (CDS)
Notes on Mitel 142d
The Mitel 142d DECT phones are supported by SIP-DECT and have an enhanced feature set compared
to GAP DECT phones. For Mitel 142d the availability status is always set to “Warning” because of the
limited feature set.
The Mitel 142d DECT phones are supported by SIP-DECT and have an enhanced feature set compared
to GAP DECT phones. For Mitel 142d the availability status is always set to “Warning” because of the
limited feature set.
The following states are not supported:
•
Handset battery state (HBS)
always set to “Unknown”
•
Software Status (SWS)
always set to “Warning” to indicate the limited feature set
•
Silent charging state (SCS)
always “Unknown”
If the DECT phone is put into silent charging mode then it sends a “Detach”, like it is switched off.
Comments on GAP DECT phones
GAP DECT phones are supported by SIP-DECT with a basic feature set. The availability status is always
set to “Warning” because of the limited feature set.
GAP DECT phones are supported by SIP-DECT with a basic feature set. The availability status is always
set to “Warning” because of the limited feature set.
1
The DECT phones must be equipped with the software version that corresponds to the SIP–DECT®
release. Otherwise, functionality may be limited.
2
GAP devices do not support the active monitoring.