King Controls 10156V10 User Manual
Vu Qube
PORTABLE_01
6
Vu Qube PORTABLE Operation
• IMPORTANT! CLEAR LINE OF SIGHT for Vu Qube Antenna to the SOUTHERN
SKY REQUIRED. Physical obstruction (i.e., smokes stacks, buildings, trees,
telephone poles, etc.) can block the satellite signal from reaching the antenna.
telephone poles, etc.) can block the satellite signal from reaching the antenna.
• Satellite TV and receiver technology are constantly changing. If you experience
difficulty contact (866) 802-2228.
Set-up
1. Place Vu Qube PORTABLE on stable surface, making sure the unit has a clear
view of the southern sky
2. Connect coaxial cable to Vu Qube PORTABLE coaxial connector
3. Make sure coaxial connector is connected to “Satellite In” port on Satellite TV
Receiver.
Finding the Satellite and Acquiring a Signal
1. Determine Dish Elevation
Options: Enter Zip Code in System Set-up on receiver
-or-
Use Quick Reference Maps to estimate Elevation
Use Quick Reference Maps to estimate Elevation
2. Position Antenna to proper Elevation using
Up/Down arrows on Vu Qube Remote.
3. Go to the signal meter screen on TV.
Choose transponder number:
Dish Network #11
DirecTV
#19
4. Rotate Antenna using Left/Right arrows
on Vu Qube remote until signal appears
on Signal Meter screen.
on Signal Meter screen.
5. Fine tune and maximize signal using all 4 arrows.
NOTE: When rotating line is straight up,
the antenna is pointing directly away
from coaxial connector on the Vu Qube.
the antenna is pointing directly away
from coaxial connector on the Vu Qube.
NOTE: Satellite Receiver and TV MUST be ON
37°
37°
This number indicates Elevation
37°
37°
Line moves to indicate
Rotating Antenna