RLW Inc. RLW88844422 User Manual
wSIM™ FAE WiTry Kit Operation Quick Start Guide
24
You should now see wSIM Network Statistics show up under the Modbus
Devices segment in the System 1® Configuration application. System 1® has
Devices segment in the System 1® Configuration application. System 1® has
now been properly configured to accept data from the WiTry™ System.
e. Click <Save Enterprise> to save the configuration in the System
1® Configuration application.
4.1.3 Start System 1® Data Acquisition
After configuring the WiTry™ Modbus devices in the System 1® Configuration
application, the System 1® Data Acquisition Connection Manager application
must be restarted.
application, the System 1® Data Acquisition Connection Manager application
must be restarted.
1. Open the System 1® Data Acquisition Connection Manager
2. Expand Data Acquisition Servers. You should see a Red Dot overtop the
DAQ associated with the WiTry™ System.
NOTE
If the DAQ has a green dot indicating it
is already running, right click and select
Close DAQ. Then proceed to step #3
below.
3. Right click on the Data Acquisition Server associated with the WiTry™
System
4. Select Initiate DAQ, see Figure 4-5.
Figure 4-5: Starting System 1® DAQ