Ophir Optronics Ltd QSR User Manual
Chapter 3 – Getting Started
The StarLab application is used with the USBI, Pulsar and Quasar devices. The
StarLab application supports the use of multiple heads and enables you to view
each head’s information in a separate window. Each connection between the
head, the device, and the application is referred to as a channel.
StarLab application supports the use of multiple heads and enables you to view
each head’s information in a separate window. Each connection between the
head, the device, and the application is referred to as a channel.
Note: You can work with multiple devices and channels at the same time. For
example, you can use two USBI or Quasar devices to work with two
channels, or one Pulsar-4 device to work with one, two, three, or four
channels. For each channel a separate application window appears
displaying the head’s information. You can use multiple USBI, Pulsar
and Quasar devices to create additional channel connections.
channels, or one Pulsar-4 device to work with one, two, three, or four
channels. For each channel a separate application window appears
displaying the head’s information. You can use multiple USBI, Pulsar
and Quasar devices to create additional channel connections.
You can use the following instructions for understanding and operating the
StarLab application. Topics include:
StarLab application. Topics include:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Starting and Ending a StarLab Application Session
To start a StarLab session:
1. From the desktop, double-click
. The StarLab application opens.
On startup, StarLab searches for devices. If only one is found, StarLab
automatically opens in full screen mode (see Figure 3-2) and begins
operation. If more than one device is found, or more than one head on a single
device, refer to Chapter 8 – Working with Multiple Heads.
automatically opens in full screen mode (see Figure 3-2) and begins
operation. If more than one device is found, or more than one head on a single
device, refer to Chapter 8 – Working with Multiple Heads.
Note: If the RP-USB application is already running, the StarLab application
will not start. Click OK to close the warning box (see Figure 3-1) and
then close the RP-USB.
then close the RP-USB.
StarLab User Guide
16