Accton Wireless Broadband Corp. FIU176205000W User Manual
Management Settings
5-61
5
Admin Accounts — Configures access levels, usernames and passwords.
(Maximum 32 entries are allowed.)
• Access Level – Configures the access privileges
(Maximum 32 entries are allowed.)
• Access Level – Configures the access privileges
that the user has.
- Admin: Grants administrator level access, no
- Admin: Grants administrator level access, no
restrictions.
- User: Grants user level access, some
restrictions.
- Guest: Grants guest level access, configuration settings may not be changed.
Note: Pressing the Reset button on the back of the wireless AP/Router for more than
5 seconds resets the user names and passwords to the factory defaults.
• Username – The name of the user. The default names preset for access to the unit
are "root" for admin level, "user" for user level and "guest" for guest level.
(Length: 3-16 characters, case sensitive)
(Length: 3-16 characters, case sensitive)
• Password – The password for management access. The default passwords
preset for access to the unit are identical to their user names, “root” for admin level,
“user” for user level and “guest” for guest level. (Length: 3-16 characters, case
sensitive)
“user” for user level and “guest” for guest level. (Length: 3-16 characters, case
sensitive)
• Confirm Password – Prompts you to enter the password again for verification.
• Action – Specifies an action to take on the admin account.
• Action – Specifies an action to take on the admin account.
- Change: By selecting a user from the table its parameters display in an editable
form. Click "Change" to save parameters once you have updated them.
- Add: Adds a newly configured user to the list.
- Edit: Click "Edit" to highlight a configured user for changing its parameters.
- Delete: Deletes a user entry from the list.
- Edit: Click "Edit" to highlight a configured user for changing its parameters.
- Delete: Deletes a user entry from the list.
Remote Accounts — Configures remote management access for the wireless AP/
Router.
• Remote administration – Enables remote administration. (Default: Enabled)
• HTTP port for remote – Specifies the HTTP port for remote access. (Default:
Router.
• Remote administration – Enables remote administration. (Default: Enabled)
• HTTP port for remote – Specifies the HTTP port for remote access. (Default:
8888; Range: 1~65535)
• Remote administration only from IP – Configures an IP address from which to
manage the unit. Using an address of 0.0.0.0 enables remote management access
from any IP address and is therefore recommended that the user change the
default setting. (Default: 0.0.0.0)
from any IP address and is therefore recommended that the user change the
default setting. (Default: 0.0.0.0)
• Update – Updates the remote administration information.
Reboot – Click the button to reboot the wireless AP/Router.