Accton Wireless Broadband Corp. FIU176205000W User Manual

Status Information

5-63

You can update the wireless AP/Router firmware by using the Firmware Update 
facility.

Firmware Update — Allows you to upload new firmware manually by specifying a 
file path. Make sure the firmware you want to use is on the local computer by 
clicking Browse to search for the firmware to be used for the update.
• Browse – Opens a directory on the local hard drive for specifying the path of the 

file to upload.

• Upload – Starts the upload procedure.

The Information pages display details on the current configuration and status of the 
wireless AP/Router, including associated wireless stations and event log messages.

Note: The Status Information pages will display different statistics depending on the 

mode selected, AP or Router. Please refer to “Installation” on page 2-1 for details. 

The System Information page displays basic system information as well as 
Management IP, WAN, LAN, WLAN and WDS settings. The displayed settings are 
for status information only and are not configurable on this page. This information is 
split into the four sections that follow. 

Click "Information", followed by “System Information" and scroll to the relevant 
section.

System — Displays the basic system information in both AP and Router modes:
• Device Mode – Displays the hardware setting determined by the switch on the 

base of the unit.