Accton Wireless Broadband Corp. FIU176205T01W User Manual

  |  Initial Configuration

Setup Wizard

–  44  –

Enable the Wireless Broadband Router IP address to be assigned 

automatically from an Internet service provider (ISP) through an ADSL 

modem using Point-to-Point Protocol over Ethernet (PPPoE).

The following items are displayed on this page:

◆

User Name — Sets the PPPoE user name for the WAN port. 

(Default: pppoe_user; Range: 1~32 characters)

◆

Password — Sets a PPPoE password for the WAN port. 

(Default: pppoe_password; Range: 1~32 characters)

◆

Verify Password — Prompts you to re-enter your chosen password.

◆

Operation Mode — Enables and configures the keep alive time and 

configures the on-demand idle time.

◆

MAC Clone — Some ISPs limit Internet connections to a specified MAC 

address of one PC. This setting allows you to manually change the MAC 

address of the Wireless Broadband Router's WAN interface to match the 

PC's MAC address provided to your ISP for registration. You can enter 

the registered MAC address manually by typing it in the boxes 

provided. Otherwise, connect only the PC with the registered MAC 

address to the Wireless Broadband Router, then click the “Clone your 

PC’s MAC Address” (Default: Disable)