Accton Wireless Broadband Corp. FIU176205T01W User Manual
C
HAPTER
4
| Initial Configuration
Setup Wizard
– 45 –
S
TEP
3 - WAN
S
ETTINGS
- PPTP
Enables the Point-to-Point Tunneling Protocol (PPTP) for implementing
virtual private networks. The service is provided in many European
countries.
Figure 17: Wizard Step 3 - WAN Settings - PPTP
The following items are displayed on this page:
◆
Server IP — Sets the PPTP server IP Address. (Default: pptp_server)
◆
User Name — Sets the PPTP user name for the WAN port.
(Default: pptp_user; Range: 1~32 characters)
◆
Password — Sets a PPTP password for the WAN port. (Default:
pptp_password; Range: 1~32 characters)
◆
Verify Password — Prompts you to re-enter your chosen password.
◆
Address Mode — Sets a PPTP network mode. (Default: Static)
◆
IP Address — Sets the static IP address. (Default: 0.0.0.0, available
when PPTP Network Mode is set to static IP.)
◆
Subnet Mask — Sets the static IP subnet mask. (Default:
255.255.255.0, available when PPTP Network Mode is set to static IP.)
◆
Default Gateway — The IP address of a router that is used when the
requested destination IP address is not on the local subnet.
◆
Operation Mode — Enables and configures the keep alive time.
◆
MAC Clone — Some ISPs limit Internet connections to a specified MAC
address of one PC. This setting allows you to manually change the MAC