ELPRO Technologies Pty Ltd 450UE User Manual
Elpro Technologies 450U-E Wireless Ethernet Modem & Device Server User Manual
Rev Version 1.4.0
www.cooperbussmann.com/wirelessresources
23
Locale Configuration
When connecting to the module for the first time (new or factory defaulted module) you will need to configure the model
Locale and a number of other radio configuration parameters before the modems can be used, these include Transmit
and Receive Frequency the channel step size and the Transmit Power level as per the country regulation.
Locale and a number of other radio configuration parameters before the modems can be used, these include Transmit
and Receive Frequency the channel step size and the Transmit Power level as per the country regulation.
The main Locale screen requires you select the appropriate Locale from the drop down list, the table will shows the
available Locales and frequency ranges based on the radio hardware. When the correct Locale is selected, press the
available Locales and frequency ranges based on the radio hardware. When the correct Locale is selected, press the
Save and Activate Changes button at the bottom of the screen.
The next page will display the Default Quick Start page. This opening screen will guide you through the initial radio
configuration parameters. See
configuration parameters. See
below for complete parameter descriptions.
You cannot navigate away from this page until the operating parameters have been set.
When all configuration parameters have been entered ensure the RUN/SETUP switch is set
tton to apply the configuration. When the modem has reset you will be directed to the Main home
screen as per Figure 24 - Main Screen below.
From here you can configure the modem as you wish. From the Main Screen the easiest way to this
which is explained in the next section 3.3 Quickstart
.
Figure 24 - Main Screen