Wistron Corporation 2008MMAPER6 User Manual
English
6
Side View (Right)
Power Button
Use the Power button [16] to turn on or off the MobileMapper
6. In both cases, a short press is enough to turn on or off the
receiver.
6. In both cases, a short press is enough to turn on or off the
receiver.
Rather than actually turning off the MobileMapper 6, the
Power button in fact puts the receiver in suspend mode. This
means that when you next turn it on, the receiver will restore
the context in which it was when you last turned it off.
Power button in fact puts the receiver in suspend mode. This
means that when you next turn it on, the receiver will restore
the context in which it was when you last turned it off.
Only complete removal of the internal battery, disconnection
of the external AC adapter or a reset action will actually shut
down the receiver.
of the external AC adapter or a reset action will actually shut
down the receiver.
SD Card Slot
Gives access to a slot [17]* where you can insert or extract an
SD card.
SD card.
Earphone Output
A 1/4-inch jack (TRS connector) [18]* used to connect an
earphone to the MobileMapper 6.
earphone to the MobileMapper 6.
Top View
Three-LED Flashlight
This is a powerful white flashlight [19] that can
advantageously be used in dim light conditions. Using
MobileMapper 6 as a flashlight may however be incompatible
with GPS reception, i.e. in the way you hold the receiver.
advantageously be used in dim light conditions. Using
MobileMapper 6 as a flashlight may however be incompatible
with GPS reception, i.e. in the way you hold the receiver.
Reset button
Press the Reset button [20] using the stylus when you need
to perform a software reset. This will re-boot the Windows
Mobile Operating System.
to perform a software reset. This will re-boot the Windows
Mobile Operating System.
Rubber Flaps
Items [14], [15], [17] and [18] presented above are all
marked with a “*” symbol indicating that a black rubber flap
is used to protect each of them.
marked with a “*” symbol indicating that a black rubber flap
is used to protect each of them.
To access one of these items, just insert a nail underneath the
flap and pull it open.
flap and pull it open.
[16]
[17]
[18]
[20]
[19]