RadioFrame Networks Inc DH2 User Manual

Method of Procedure 
Connecting to the Customer LAN 

RFN_3.1 Beta

 

Verifying the LAN installation requires a laptop that has 802.11b internally or a 
client card that plugs into the PCMCIA port. 

1  Associate with a RAP in the RFS by matching the SSID on the client (laptop) 

and the SSID that is configured in the System Manager. 

2  Setup a static address on the client to communicate with the RFS (refer to the 

appendixes for a list of default IP addresses for the RFS).  

3  Once associated, open a command window and ping the RLIC IP addresses 

to confirm that the client is properly associated with the RAP (this also 
confirms connectivity up to the RLIC).   

4  Once associated, navigate to a few Internet addresses. This requires that the 

Administrator correctly configure their network for this navigation.