RadioFrame Networks Inc DH2 User Manual
RadioFrame System
Introduction
RFN_3.1 Beta
1
1 Introduction
1.1 Scope of the Manual
This manual describes standards for installing, modifying and maintaining
RadioFrame Networks’ equipment at RadioFrame customer sites. All
specifications and requirements pertain to the RadioFrame Networks equipment
required in RFN customer iDEN (integrated Digital Enhanced Network) and
802.11b installations. RadioFrame Networks recommends reading the entire
manual before attempting to install or operate RadioFrame Networks equipment.
RadioFrame Networks’ equipment at RadioFrame customer sites. All
specifications and requirements pertain to the RadioFrame Networks equipment
required in RFN customer iDEN (integrated Digital Enhanced Network) and
802.11b installations. RadioFrame Networks recommends reading the entire
manual before attempting to install or operate RadioFrame Networks equipment.
1.1.1
Prerequisites and Responsibilities
All installers are required to be trained and certified to install RadioFrame
Networks equipment as follows:
Networks equipment as follows:
•
Installers shall be trained for specific equipment or the warranty on that
equipment may be invalidated.
equipment may be invalidated.
•
All installers shall be able to use required tools and test equipment properly.
•
Installers shall clean up and properly store tools at the end of each day’s
work.
work.
The installation Project Manager shall be responsible for, but not limited to:
•
Ensuring that all detailed engineering specifications, job drawings, technical
information, and documentation required to successfully complete an
installation are on site.
information, and documentation required to successfully complete an
installation are on site.
•
Making an inventory and conducting a visual inspection of all equipment
shipped to the job site prior to the installation.
shipped to the job site prior to the installation.
•
Identifying any physical damage, defects, or problems that may prevent the
proper installation, maintenance, or operation of equipment and reporting this
information to the proper parties involved.
proper installation, maintenance, or operation of equipment and reporting this
information to the proper parties involved.
•
Ensuring that all installation job activities are completed in a safe and
professional manner whether or not the specific activity is mentioned in this
manual.
professional manner whether or not the specific activity is mentioned in this
manual.
•
Ensuring that all locations where painted surfaces have been marred are
touched up. The touch-up paint shall be the same quality and shade as the
paint used on the item being touched up.
touched up. The touch-up paint shall be the same quality and shade as the
paint used on the item being touched up.
•
Using this Method of Procedure/RadioFrame System manual to ensure that
each specific job has been performed.
each specific job has been performed.
•
Ensuring that the site is cleaned up after installation.