RadioFrame Networks Inc DH2 User Manual

RadioFrame System 

RFN_3.1 Beta

 

If the fan is not working, unplug 
the ACU and contact Customer 
Support. 

RJ45 port Link and 
Activity LEDs are not lit, 
or the Activity LED is not 
blinking 

connection is not being 
made between RFS 
components 

 

For the affected port, verify that 
all cabling between 
components is properly 
connected. 

The RadioFrame Unit (RFU) has two RJ45 ports on the top of the back cover of 
the unit: MAIN and AUX. Only the MAIN port is used. The AUX port has a 
protective cover that must not be removed. During installation, ensure that the 
RFU is receiving power and connectivity from the ACU before inserting 
RadioBlades into the RFU or placing the front cover on the RFU. 

 

 

Warning! 

Do not  remove the protective cover from or insert a connector into the AUX port. This will 
cause damage to the RFU, the ACU, or both. 

 

The MAIN port has two LEDs: Link (right) indicates Ethernet connectivity, and 
Activity (left) blinks to indicate Ethernet activity between the RFU and the ACU. 
For all other conditions, refer to the following table. 

 

MAIN Port LEDs do not 
light 

connection is not being 
made between the RFU 
and the ACU 

 

Verify that all cabling between 
the ACU and the RFU is 
properly connected. 

 

Verify that the ACU is powered 
on. 

 

Contact Customer Support. 

 

The Universal Repeater Unit (URU) has two pairs of RJ45 ports on the front of 
the unit. Each pair (IN/OUT) indicates Ethernet connectivity and activity between