RadioFrame Networks Inc DH2 User Manual
RadioFrame System
Appendixes
RFN_3.1 Beta
149
Figure 37
Mount the ACU only in an EIA-standard compliant 19” rack.
Connect the NCU to the ACUs
After the main rack has been installed and all wiring for the RFS has been
completed, connect the main rack ACU and all remote ACUs to the NCU.
completed, connect the main rack ACU and all remote ACUs to the NCU.
1 Connect the RJ45-to-RJ45 CAT 5 cable for each ACU to the specified RJ45
port (1-8) on the back of the NCU.
Refer to the site documentation to determine which ACU connects to each
port on the NCU. The Activity and Link LEDs above the ports will remain unlit
until each ACU has been installed and plugged in.
port on the NCU. The Activity and Link LEDs above the ports will remain unlit
until each ACU has been installed and plugged in.
Figure 38
Connect the RJ45-to-RJ45 CAT 5 cable for each ACU to the specified
RJ45 port on the back of the NCU.
RJ45 port on the back of the NCU.