RadioFrame Networks Inc DH2 User Manual
Method of Procedure
Introduction
Introduction
6
RFN_3.1 Beta
1.4.3 Recommendations
1.4.3.1 Safety
Recommendations
•
Keep tools away from walk areas where you and others could fall over them.
•
Wear safety glasses if you are working under any conditions that might be
hazardous to your eyes.
hazardous to your eyes.
•
Do not perform any action that creates a potential hazard to people or makes
the equipment unsafe.
the equipment unsafe.
1.4.3.2
Guidelines for Working on Equipment Powered by Electricity
•
Locate the emergency power off switch for the room in which you are
working. Then, if an electrical accident occurs, you can act quickly to turn off
the power.
working. Then, if an electrical accident occurs, you can act quickly to turn off
the power.
•
Before installing, removing, or repairing an NCU, ACU or URU, unplug the
power cord.
power cord.
•
Disconnect all power before working near power supplies.
•
Do not work alone if potentially hazardous conditions exist.
•
Never assume that power is disconnected from a circuit. Always check.
•
Look carefully for possible hazards in your work area, such as moist floors,
ungrounded extension cables, frayed power cords, and missing safety
grounds.
ungrounded extension cables, frayed power cords, and missing safety
grounds.
1.4.3.3
In the Event of an Electrical Accident
•
Use caution; do not become a victim yourself.
•
Turn off power to the system.
•
If possible, send another person to get medical aid. Otherwise, assess the
condition of the victim and then call for help.
condition of the victim and then call for help.
•
Determine if the victim needs rescue breathing or external cardiac
compressions, then take appropriate action.
compressions, then take appropriate action.