RadioFrame Networks Inc DH2 User Manual
RadioFrame System
System Description
RFN_3.1 Beta
21
2.2.2 Remote
ACUs
Remote ACUs are located in Telco rooms or other closets throughout the
building mounted in 19” EIA-standard compliant racks or equivalent. The racks
for remote ACUs may be either floor or wall-mounted racks. Any other method
used to mount the remote ACU is not approved, and could void the warranty on
the product and other components in the RFS.
building mounted in 19” EIA-standard compliant racks or equivalent. The racks
for remote ACUs may be either floor or wall-mounted racks. Any other method
used to mount the remote ACU is not approved, and could void the warranty on
the product and other components in the RFS.
2.2.3 RFUs
RFUs are located throughout the building to provide coverage for specific areas.
RFUs are typically mounted on or above the ceiling, or on a wall. The following
illustration depicts typical RFU locations using a simple floor plan. Three RFUs,
denoted by triangles, are located along the central hallway providing coverage to
each portion of the floor. Antenna coverage for each RFU is a 100-foot radius
(30.3 meters) or approximately 32,000 square feet (2,920 square meters).
RFUs are typically mounted on or above the ceiling, or on a wall. The following
illustration depicts typical RFU locations using a simple floor plan. Three RFUs,
denoted by triangles, are located along the central hallway providing coverage to
each portion of the floor. Antenna coverage for each RFU is a 100-foot radius
(30.3 meters) or approximately 32,000 square feet (2,920 square meters).
Figure 13
RFUs are located throughout the building to provide coverage.
2.2.3.1
RadioBlades and RAPS
The number and combination of RadioBlades and RAPs to be installed in each
RFU is driven by the coverage and capacity requirements of that particular
portion of the building. A maximum of six iDEN RadioBlades can be installed in
each RFU. A maximum of three RAPs can be installed in each RFU. The
combined total of iDEN RBs and RAPs is seven per RFU. Each RadioBlade is
supplied with an antenna that must be installed vertically and pointed down
towards the ground.
RFU is driven by the coverage and capacity requirements of that particular
portion of the building. A maximum of six iDEN RadioBlades can be installed in
each RFU. A maximum of three RAPs can be installed in each RFU. The
combined total of iDEN RBs and RAPs is seven per RFU. Each RadioBlade is
supplied with an antenna that must be installed vertically and pointed down
towards the ground.