RadioFrame Networks Inc DH2 User Manual
RadioFrame System
Pre-Installation
RFN_3.1 Beta
35
System
Unit
Weight
iSC-3 (2)
EAS
CSU
Power Plant
Rectifier
72 lbs
(Power Plant 58 lbs) + (two Rectifiers at 7 lbs ea.)
Battery
600
lbs
(eight batteries at 75 lbs each)
3.3.4 Power
System
Unit
Power
RadioFrame System
NCU
100-240 Volts AC, 47-63 Hz, 8-3.5A, or
Negative 52.5 ±.5 Volts DC, 11A
ACU
100-240 Volts AC, 47-63 Hz, 8-3.5A, or
Negative 52.5 ±.5 Volts DC, 11A
iDEN Interface
iSC-3 (1)
Negative 40-60 Volts DC; 1.5 A
iSC-3 (2)
Negative 40-60 Volts DC; 1.5 A
EAS
Negative 40-60 Volts DC
CSU
Negative 40 Volts DC
Power Plant
Rectifier
Input
Voltage
85 to 265 VAC (continuous)
45 to 70 Hz
Current
12 Amp maximum
The rectifier’s micro-controller adjusts
the output current to limit the input
current to allow each rectifier to be
plugged into a standard 115/230 VAC @
15 Amp IEC outlet.
the output current to limit the input
current to allow each rectifier to be
plugged into a standard 115/230 VAC @
15 Amp IEC outlet.
Power Factor
>90% for 20% to 100% loads
Output
Voltage
50.00 to 60.00 VDC
52.5 VDC Factory Set (default)
Regulation
± 1.0% (includes output o-ring diode)
Overvoltage
50.00 to 60.00 VDC
57.00 VDC Factory Set (default)
RED [FAIL] LED indication and shuts
down rectifier providing output
current.
down rectifier providing output
current.
Noise
<32 dBmC (voice frequency)
<100 millivolts-RMS (wide band)
<250 millivolts peak-to-peak